SDX 6.4.x Network Guide > Locating Subscriber Information > Changing NIC Configurations

Changing NIC Configurations

If you change the type of NIC resolution that you use in your network (for example, from the OnePop resolution to the OnePopAllRealms resolution), delete the old data; otherwise the new NIC configuration may not perform resolutions correctly.

To change the type of NIC resolution that you use in your network:

1. Delete the NIC configuration data for the old resolution from the DN ou=dynamicConfiguration, ou=Configuration, o=Management, o=umc in the directory.

You can delete the old data with SDX Admin or another LDAP client.

2. Configure the new NIC scenario.