SDX 6.4.x Network Guide > Using JUNOSe Routers in the SDX Network > Specifying Router Initialization Scripts on the SAE

Specifying Router Initialization Scripts on the SAE

To use SDX Configuration Editor to specify router initialization scripts:

1. In the navigation pane, select a configuration file for the SAE that you want to configure.
2. Select the Router tab, and expand the Router Scripts section.
3. Edit or accept the default values in the fields.

See JUNOSe Router Script Fields.

4. Select File > Save.
5. Right-click the configuration file, select SDX System Configuration > Export to LDAP Directory.

JUNOSe Router Script Fields

In SDX Configuration Editor, you can edit the following fields in the Router pane in an SAE configuration file.

Extension Path

• Path to router initialization scripts that are not in the default location, /opt/UMC/sae/lib.
• Value—List of paths separated by semicolons (;)
• Default—No value
• Property name—Extension.path

General Script

• Router initialization script that can be used for all types of routers that the SDX software supports. The script is run when the connection between a router and the SAE is established and again when the connection is dropped.
• Value—Name of a script
• Default—No value
• Property name—Router.script.*

JUNOSe Script

• Router initialization script for JUNOSe routers when the JUNOSe driver uses COPS-PR mode when connecting to the SAE. The script is run when the connection between a router and the SAE is established and again when the connection is dropped.
• Value—Name of a script
• Default—No value
• Property name—Router.script.junose

JUNOSe Script (XDR)

• Router initialization script for JUNOSe routers when the JUNOSe driver uses XDR mode when connecting to the SAE. The script is run when the connection between a router and the SAE is established and again when the connection is dropped.
• Value—Name of a script
• Guidelines—In COPS XDR mode, the router does not send the network access server (NAS) IP address to the SAE. If your configuration requires this value, add the following line to a JUNOSe script:

import ERXnasip

When you add the import ERXnasip entry, the script obtains the NAS-IP address from the router through SNMP. This mechanism can affect performance, especially when the SAE manages a large number of virtual routers.

• Default—Unspecified
• Examples—iorPublisher, poolPublisher
• Property name—Router.script.junose_xdr