Using JUNOSe Routers in the SDX Network
This chapter describes how to set up the SDX software and the JUNOSe router so that the JUNOSe router can be used the SDX network. It also shows how to monitor the interactions between the SAE and the JUNOSe router and how to troubleshoot SDX problems on the router. The chapter contains the following sections:
- COPS Connection Between JUNOSe Routers and the SAE
- Adding JUNOSe Routers and Virtual Routers
- Configuring the SAE to Manage JUNOSe Routers
- Using SNMP to Retrieve Information from JUNOSe Routers
- Developing Router Initialization Scripts
- Specifying Router Initialization Scripts on the SAE
- Updating Local IP Address Pools for JUNOSe VRs
- Accessing the Router CLI
- Starting the SDX Client on a JUNOSe Router
- Stopping the SDX Client on a JUNOSe Router
- Monitoring Interactions Between the SAE and the JUNOSe Router
- Troubleshooting the SDX Client on JUNOSe Routers