SDX 6.4.x Network Guide > Using JUNOS Routing Platforms in the SDX Network > Monitoring Interactions Between the SAE and JUNOS Routing Platforms

Monitoring Interactions Between the SAE and JUNOS Routing Platforms

Use the following command on JUNOS routing platforms to monitor the connection between the JUNOS routing platform and the SAE.

root@ui1> show system services service-deployment 

Connected to 172.17.20.151 port 3333 since 2004-02-06 14:50:31 PST

Keepalive settings: Interval 15 seconds

Keepalives sent: 100, Last sent: 6 seconds ago

Notifications sent: 0

Last update from peer: 00:00:06 ago

You can also monitor the interactions between the SDX software and JUNOS routing platforms in the log files for the SAE and in the log files generated by the SDX software process on the JUNOS routing platform. For information about configuring logging for the SAE, see SDX Monitoring and Troubleshooting Guide, Chapter 2, Configuring Logging for SDX Components. For information configuring logging on JUNOS routing platforms, see JUNOS System Basics Configuration Guide.