[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]


Creating a VLAN Subinterface

To create a VLAN subinterface:

  1. In the Device-wide Explorer, select Interfaces in the VLAN folder, right-click, and select List All.
  2. In the list area, select the VLAN interface you want, right-click, select Create, and click VLAN Sub Interface.

The Create VLAN Sub Interface dialog box appears.

  1. Set parameters and click OK. (Table 28)

Table 28:
Field
Description
Range/Length
Default
Name

ifDescr of the VLAN subinterface; not configurable, created by the router

Not applicable

Not applicable

Alias

ifAlias used for the VLAN subinterface being created

0-64 characters

Empty

ifIndex    

Not configurable

Not applicable

Not applicable

Operational Status

Operational status of the VLAN Subinterface    

Not applicable

Not applicable

Administrative Status    .

Administrative status used for this interface

Up or Down    

Up

S-VLAN ID        

    S-VLAN identifier; required for S-VLANs

0-4095

Empty

VLAN ID

VLAN identifier; required for both VLANs and S-VLANs    

0-4095

Empty

Tagged    

Indicates if this VLAN is tagged or untagged; untagged is only applicable for a VLAN with the ID of 0

Not applicable

Selected

Advisory Speed Transmit    

Advisory transmit speed for the VLAN subinterface being created

0-2147483647    

0

Advisory Speed Receive    

Advisory receive speed for the VLAN subinterface being created

0-2147483647    

0

QoS Profile Name

Name of the QoS profile to attach to this VLAN subinterface

Not applicable

None

Ethertype    

S-VLAN Ethertype of the customer premises equipment to which the router connects.

8100, 88a8, 9100

9100


Create VLAN Sub Interface Parameters

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]