Overview
A trap destination defines which host to send SNMP traps to when certain conditions apply. You can create a trap destination model or template that contains default parameters for trap destinations. You can then associate this model with one or more virtual routers.
The trap destination default parameters can be used across many virtual routers over multiple devices. The default parameters you select should be appropriate to the needs of the virtual router(s) with which you are associating the trap destination. A virtual router on a device is capable of configuring up to eight trap destination hosts.
By modeling trap destination hosts, you can see how many of your E-series devices are configured to send SNMP traps to a specific host. Also, when you use trap destination models, you can share common parameters for a host with multiple virtual routers on many E-series devices.
References
For more detailed information, see:
- Chapter 3, Configuring Virtual Routers
- JUNOSe System Basics Configuration Guide, Chapter 4, Configuring SNMP