NMC-RX 7.3.x User Guide, Vol. 2 > Configuring BGP Neighbors > Creating Access Lists

Creating Access Lists

If none exists, you must create an access list before configuring a BGP neighbor.

To create an access list:

1. In the Device-wide Explorer, select Virtual Routers, right-click, and click List All.

The list of virtual routers appears in the list area.

2. In the list area, select a virtual router, right-click, select Create, and click Access List.

The Create Access List Entry dialog box appears.

3. Set each parameter (Table 36).

 Table 36:  Access List Parameters 

 Parameter
 Description

 Access List Name

 Name you assign to the access list


 IP Address

 Address for the access list


 Address Mask

 Address mask for the access list


 Access Capability


  
 Permit—Device is allowed to receive or send data
  
 Deny—Device is not allowed to receive or send data




 

4. Click OK.