NMC-RX 7.3.x User Guide, Vol. 1 > Configuring T3/E3 and T1/E1 Modules > Configuring a Module

Configuring a Module

You can configure the admin status for a module only by enabling or disabling it.

To change the admin status:

1. In the Instance Explorer list, select the module that you want to configure.
2. Right-click, and select Configure.

The Module Config tab appears in the work area.

3. Select the admin status (Table 53).

 Table 53:  Module Configuration Parameters (CT3, T3, and E3)  

 Field 
 Description

 Module Type

 Module type (cannot edit)


 Admin Status


  
 Enabled—Module is running
  
 Disabled—Module is not in operation



 Serial Number

 Ten-digit identification number (S/N) on the face plate of the module. This value is automatically retrieved from the device, and you cannot edit it.


 IOA Serial Number

 Ten-digit identification number (S/N) on the face plate of the input/output adapter. This value is automatically retrieved from the device, and you cannot edit it.



 

4. Click Save.