NMC-RX 7.3.x User Guide, Vol. 1 > Configuring the System > Updating a Single Module or Port

Updating a Single Module or Port

You can update the NMC-RX configuration for a single module or port to match the current configuration on the physical device.

To update a single module or port:

1. In the Instance Explorer, select the module or port, right-click, and select Update.

The Update Module window or Update Port window (not shown) appears.

Any error messages or warnings that may occur during the update appear in the Updating Device dialog box. If only warnings occur, the update continues. However, if any errors occur, the update does not take place.

2. Click Close after the update is complete.