NMC-RX 7.3.x User Guide, Vol. 1 > Configuring Customer Accounts > Associating Customer Profiles with IP Interfaces

Associating Customer Profiles with IP Interfaces

After you create and configure a customer profile and customer site, you can associate the customer profile with an IP interface.

To access the Customer Information dialog box:

1. From the Device-wide Explorer, select IP Interfaces, right-click, and select List All.

All IP interfaces appear in the list area.

2. Select an IP interface from the list, right-click, and select Configure.

The IP Intf Configuration tab appears in the work area.

3. Click the Customer Information tab.

The Customer Information tab appears.

4. Click the Associate Customer button.

The Associate Customer dialog box appears.

5. From the Select Customer group box, click the customer name that you want to associate with the IP interface.

The Select Customer Site group box becomes active.

6. From the Select Customer Site group box, click the customer site with which you want to associate with a customer profile.

The technical and administrative contact information appears.

7. Click OK.

The new customer site information appears on the Customer Information tab.

Now that the customer profile is associated with the IP interface you selected, refer to NMC-RX User Guide, Vol. 2, Chapter 6, Configuring IP, to continue the IP interface configuration process.

Removing a Customer Profile from an Interface

To dissociate, or remove, a customer profile from an IP interface:

1. From the Customer Information tab, click the Clear Customer button.

All customer information listed in the fields is cleared. The customer profile is no longer associated with the IP interface.

2. Click the Associate Customer button, and make new selections. You could also select a different IP interface and start this procedure again.