NMC-RX 7.2.x User Guide, Vol. 1 > Configuring PPP over Ethernet > Creating a PPPoE Interface

Creating a PPPoE Interface

 NOTE: Although this chapter discusses working with PPPoE on an ATM subinterface, PPPoE interfaces can be created on these other interfaces: FE, GE, VLAN, bridged IP, and ATM.



 

To create a PPPoE interface:

1. Navigate to an ATM interface.
2. Right-click, select List All, and click ATM Sub Interfaces.

All available ATM subinterfaces appear in the list area.

3. From the list, right-click a subinterface, select Create, and click PPPoE Interface.

The Create PPPoE Interface dialog box appears.

4. Set the Max PPP Sessions parameter (Table 87).

 Table 87:  PPPoE Interface Parameters 

 Parameter
 Description

 Name

 Identifies the interface; generated automatically


 Alias

 Description of the interface; 0-15 characters; default: blank


 IfIndex

 Identifies the interface on the particular line interface; generated automatically


 Operational

 Current operational status of the interface


 Administrative

 Desired status of the interface: Up/Down; default: Up


 Max. PPP Sessions

 Maximum number of subinterfaces permitted on this interface; range 0-4094; default 0 (no limit)



 

5. Click OK.