NMC-RX 7.2.x User Guide, Vol. 1 > Organizing Your Network with Groups and Devices > Configuring a Device

Configuring a Device

This section describes how to configure devices. For more detailed information about configuring devices, see the various configuration chapters in this user guide and in Chapter 6, Configuring the System.

To configure an existing device:

1. Select the device, right-click, and select Configure.

The device appears in the Device Workshop Instance Explorer with all modules installed on it.

2. To continue the system configuration, see Chapter 6, Configuring the System. To configure the modules for a device, see the appropriate configuration chapters in this guide.