Configuring Modules

You can configure only a module's admin status (enabled or disabled).

To configure a module:

1. In the Instance Explorer list, select the module you want to configure.
2. Right-click, and select Configure.

The Module Config tab appears in the work area.

3. Set the module parameters (Table 37).

 Table 37:  Module Configuration Parameters  

 Field 
 Description

 Module Type

 Module type (cannot edit)


 Admin Status


  
 Enabled—Module is running
  
 Disabled—Module is not in operation



 Serial Number

 Ten-digit identification number (S/N) on the module's faceplate. This value is automatically retrieved from the device, and you cannot edit it.


 IOA Serial Number

 Ten-digit identification number (S/N) on the input/output adapter's faceplate. This value is automatically retrieved from the device, and you cannot edit it.



 

4. Click Save.

The settings are saved.