--
-- Juniper Enterprise Specific MIB: Virtual Chassis
--
-- Copyright (c) 2007-2008, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--

JUNIPER-VIRTUALCHASSIS-MIB  DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE    FROM SNMPv2-SMI
    MacAddress,DisplayString        FROM SNMPv2-TC
    JnxChassisId                    FROM JUNIPER-MIB
    jnxExVirtualChassis             FROM JUNIPER-EX-SMI;


    jnxVirtualChassisMemberMIB MODULE-IDENTITY

    LAST-UPDATED "200707100000Z" -- 10 July, 2007
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
         "Juniper Technical Assistance Center
          Juniper Networks, Inc.
          1194 N. Mathilda Avenue
            Sunnyvale, CA 94089
            E-mail: support@juniper.net"

    DESCRIPTION
            "The MIB modules for Virtual Chassis Member.Virtual Chassis Member feature allows a set of
             EX-Series switches to be connected together to form a Virtual Chassis. A virtual chassis
             will give all the features of a real chassis, potentially at a much lower cost points.
             A virtual chassis will be managed as a single box and will appear as a single network
             element to other switches and routers in the network. Some EX-Series switches will have
             the special high speed stacking ports which are used to connect to each other to form a 
             stack. The EX-Series switches can also be connected by the 10GE (or 1GE) network ports to
             form a stack. These can be used by EX-Series switches that don't have dedicated stacking ports.
             Up to a maximum of 10 boxes can be stacked together."

       ::= { jnxExVirtualChassis 1 }

--
-- virtual chassis table
--

    jnxVirtualChassisMemberTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxVirtualChassisMemberEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A list of virtual chassis Member information entries."
    ::= { jnxVirtualChassisMemberMIB 1 }

    jnxVirtualChassisMemberEntry OBJECT-TYPE
    SYNTAX      JnxVirtualChassisMemberEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the virtual chassis Member information table."
        INDEX   { jnxVirtualChassisMemberId }
    ::= { jnxVirtualChassisMemberTable 1 }

    JnxVirtualChassisMemberEntry ::=
    SEQUENCE {
        jnxVirtualChassisMemberId                         INTEGER,
        jnxVirtualChassisMemberSerialnumber               DisplayString,
        jnxVirtualChassisMemberRole                       INTEGER,
        jnxVirtualChassisMemberMacAddBase                 MacAddress,
        jnxVirtualChassisMemberSWVersion                  DisplayString ,
        jnxVirtualChassisMemberPriority                   INTEGER,
        jnxVirtualChassisMemberUptime                     INTEGER
    }

    jnxVirtualChassisMemberId OBJECT-TYPE
    SYNTAX      INTEGER (0..9)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Identifies the virtual-chassis member."
    ::= {  jnxVirtualChassisMemberEntry 1 }

    jnxVirtualChassisMemberSerialnumber OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
    DESCRIPTION
        "Serial number of the virtual-chassis member."
    ::= {  jnxVirtualChassisMemberEntry 2 }

    jnxVirtualChassisMemberRole OBJECT-TYPE
    SYNTAX        INTEGER {
                    master (1),
                    backup (2),
                    linecard (3)
                    }

    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Specifies whether the virtual-chassis member is of the type:
        master(1), backup(2), linecard (3) "
    ::= {  jnxVirtualChassisMemberEntry 3 }

    jnxVirtualChassisMemberMacAddBase OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Identifies Media Access Control Address base for the virtual-chassis member."
    ::= {  jnxVirtualChassisMemberEntry 4 }

    jnxVirtualChassisMemberSWVersion OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Identifies the JUNOS Base OS Software suite running on the virtual-chassis
        member."
    ::= {  jnxVirtualChassisMemberEntry 5 }

    jnxVirtualChassisMemberPriority OBJECT-TYPE
    SYNTAX      INTEGER (1..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This specifies the priority of the virtual-chassis member which can
        vary from 1 to 255."
    ::= {  jnxVirtualChassisMemberEntry 6 }

    jnxVirtualChassisMemberUptime OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies the virtual-chassis member uptime. "
    ::= {  jnxVirtualChassisMemberEntry 7 }
    END