Skip to content

Support



Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.



What is J-Care?

It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!


Configuring BGP Sessions (J-Web Procedure)

J-Web Configuration allows you to create BGP peering sessions.

Note: To configure BGP sessions a license must be installed on the switch.

To configure a BGP peering session :

  1. In the J-Web user interface, select Configure> Routing >BGP Routing.
  2. Enter information into the configuration page for BGP, as described in Table 1.
  3. To apply the configuration, click Apply.

Table 1: BGP Routing Configuration Summary

Field

Function

Your Action
Router Identification 

Router Identifier (required)

Uniquely identifies the device.

Type the switch's 32-bit IP address, in dotted decimal notation.

BGP 

Enable BGP

Enables or disables BGP.
  • To enable BGP, select the check box.
  • To disable BGP, clear the check box.

Autonomous System Number

Sets the unique numeric identifier of the AS in which the switch is configured.

Type the switch's 32-bit AS number, in dotted decimal notation.

If you enter an integer, the value is converted to a 32-bit equivalent. For example, if you enter 3, the value assigned to the AS is 0.0.0.3.

Peer Autonomous System Number

Sets the unique numeric identifier of the AS in which the peer host resides.

Type the peer host's 32-bit AS number, in dotted decimal notation.

If you enter an integer, the value is converted to a 32-bit equivalent. For example, if you enter 3, the value assigned to the AS is 0.0.0.3.

Peer Address

Specifies the IP address of the peer host's interface to which the BGP session is being established.

Type the IP address of the peer host's adjacent interface, in dotted decimal notation.

Local Address

Specifies the IP address of the local host's interface from which the BGP session is being established.

Type the IP address of the local host's adjacent interface, in dotted decimal notation.