Skip to content

Support



Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.



What is J-Care?

It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!


immediate-leave

Syntax

immediate-leave;

Hierarchy Level

[edit protocols igmp-snooping vlan vlan-id | vlan-name]

Release Information

Statement introduced in JUNOS Release 9.1 for EX-series switches.

Description

(Applies only to switches running IGMPv2.) After the switch receives a leave group membership message from a host, immediately remove the group membership from the interface and suppress the sending of any group-specific queries for the multicast group.

Note: When configuring this statement, ensure that the IGMP interface has only one IGMP host connected. If more than one IGMPv2 host is connected to the switch through the same interface and one of the hosts sends a leave message, the switch removes all hosts on the interface from the multicast group. The switch loses contact with the hosts in the multicast group that did not send a leave message until they send join requests in response to the next general multicast listener query from the router.

Default

The immediate-leave feature is disabled.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.