Skip to content

Support



Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.



What is J-Care?

It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!


Configuring the Native VLAN Identifier on EX-series Switches (CLI Procedure)

EX-series switches support receiving and forwarding routed or bridged Ethernet frames with 802.1Q VLAN tags. The logical interface on which untagged packets are to be received must be configured with the same native VLAN ID as that configured on the physical interface.

    To configure the native VLAN ID using the CLI:

    1. Configure the port mode so that the interface is in multiple VLANs and can multiplex traffic between different VLANs. Trunk interfaces typically connect to other switches and to routers on the LAN. Configure the port mode as trunk:
      [edit interfaces ge-0/0/3 unit 0 family ethernet-switching]
      user@switch# set port-mode trunk
    2. Configure the native VLAN ID:
      [edit interfaces ge-0/0/3 unit 0 family ethernet-switching]
      user@switch# set native-vlan-id 3